Tuesday, September 27, 2016

Riveted wing skin, wing tip

Finished riveting on the wing skins. The wing tips will be removable, using the Airward kit.





Sunday, September 18, 2016

Ready to rivet on the wing skins

Riveted on all the brackets for the wires. Used m4 A4 bolts and loctite to fasten the clamps. Then I got into problem with the aileron pushrod. The hole in the wing is not at the right place. I had to widen it a few mm to prevent interference. I also had to trim the paddle a tiny bit to prevent interference with the ball joint.